We don’t believe in using surprises or hidden fees. We will provide you with an accurate upfront written estimate.
RED CARPET TREATMENT
Your home is extremely valuable. We will treat it with care by wearing protective shoe coverings and placing down mats.
24/7 EMERGENCY SERVICE
You don’t choose when a plumbing emergency happens. We are here to address your issues 24 hours a day, 7 days a week.
Tearing up your home, yard, and hardscaping can be a thing of the past. Scott English Plumbing has specialized equipment specifically for trenchless epoxy sewer relining that. Pipe lining lines the pipes with a harder epoxy liner.
This modern solution is less costly than digging up your home, often saving as much as 40% when compared to typical excavation costs. In addition to the cost savings, we know it is usually impossible to find matching floor terrazzo, marble or tile that was installed decades ago.
The process involves removal of all the deposits and debris from within the current pipes. The debris is captured at the end of the line and removed permanently from your piping system. Once the pipe is clean, the epoxy lining is sent down the same pipe where in a few hours, it’s hardened & ready for use.
$500 Off Trenchless Epoxy Sewer Relining offer valid on Epoxy Liners and cannot be combined with any other offer, for a limited time only.
In addition to trenchless “no dig” epoxy lining sewer replacement technology, Scott English Plumbing specializes in pipe bursting. This is a trenchless sewer replacement method where a large cone shape head is hydraulically pulled by steel cable through the old sewer line, breaking apart the old pipe underground while at the same time pulling into place a seamless HDPE pipe that is the same size or larger than the old pipe.
1. Identify the Problem by Sewer Camera
When we come to your home we will run a camera through your sewer main lines and/or kitchen/laundry lateral lines. From here the technician will be able to evaluate your needs and recommend the best solution trenchless sewer repair for your specific problem.
2. Access The Sewer Line
Two small holes are dug at either end of the sewer run that will be replaced. Cable is inserted at one end and fed through. One end of the cable is attached to a pneumatic jack while the other end is attached to a cone shaped bursting head.
3. New Pipe Inserted In Place Of Old Pipe
The bursting head is attached to a new seamless, heat-fused HDPE pipe. As the bursting head is pulled through the old sewer line, it simultaneously breaks apart the old pipe (even cast iron) and pulls behind the new pipe.